Skip to main content

Response Headers

Overview

This module adds and removes headers from the HTTP response before it is returned to the client. This is useful for stripping internal headers or enforcing the use of security headers without modifying your upstream service.

You may interpolate variables into header values to make them dynamic.

Example Usage

ngrok http 80 \
--response-header-add='content-security-policy: self' \
--response-header-add='dial-duration: ${.backend.dial_duration}' \
--response-header-remove='internal-trace-id'

Behavior

Variable Interpolation

You may interpolate variables into header values. Variables are interpolated into headers with JSONPath expressions surrounded by the ${} syntax.

For example to return to the duration spent dialing the upstream service, you may construct a header value like so.

ngrok http 80 --response-header-add 'dial-duration: ${.backend.dial_duration}'

If you are specifying variable interpolation from the command line, make sure to use single quotes for the command line argument otherwise it is likely that the shell will interpret your variable definition.

Consult the Variables Reference for the available variables.

Multiple Header Values

HTTP headers may include the same header multiple times. You may add a header multiple times with different values and it will be added multiple times. For example:

ngrok http 80 --response-header-add "foo: bar" --response-header-add "foo: baz"

will result in a header with multiple values set

HTTP/2 200
foo: bar
foo: baz
note

There is a bug which currently causes the above behavior not to be correct. Only the last header will be used when specifying multiple headers. This behavior will be fixed to match what is documented above.

If you remove a header that has multiple values, all values will be removed.

Replacing Header Values

If you add a header that is already present in the HTTP response, it will add another header. For example, if you run:

ngrok http 80 --response-header-add "foo: new-value"

And the HTTP response from the upstream server was:

HTTP/2
foo: original-value

The client will receive the following:

HTTP/2
foo: original-value
foo: new-value

If you wish to replace a header, you can combine header removal and addition to achieve that effect.

ngrok http 80 --response-header-remove "foo" --response-header-add "foo: new-value"

This will cause the HTTP response in this case to become:

HTTP/2
foo: new-value

Case Sensitivity

When adding headers, ngrok normalizes all header keys to a lower case representation per the http/2 RFC. See RFC 7540.

When removing headers, ngrok will remove any headers that match with a case-insensitive comparison.

Ordering

Response header changes made by other modules can be overridden by this module because this module is executed immediately before the HTTP header is written to the client.

http_request_complete.v0 events include any header changes made by this module because those events are published after this module executes.

Reference

Configuration

ParameterDescription
Added HeadersA list of header names to header values. Max 5.
Removed HeadersA list of header names to remove. Max 5.

Upstream Headers

This module does not add any upstream headers.

Errors

This module does not return any errors.

Events

This module does not populate any fields in events.

Edges

Response Headers is an HTTPS Edge module which can be applied to Routes.

Pricing

This module is available on all plans.

If you are not subscribed to a paid account, it is not permitted to remove the ngrok-agent-ip header. This header is part of ngrok's abuse deterrence mechanism.

Variables

ngrok makes variables available for interpolation into headers.

Some variables will only be populated with values if you have configured the corresponding module for your endpoint, otherwise they will be empty. For example, the variable ${.basic_auth.username} is only available if you have enabled the basic auth module on your endpoint.

Backend Variables

${.backend.connection_reused}True if ngrok reused a TCP connection to transmit the HTTP request to the upstream service.
${.backend.dial_duration}The time to establish a connection from ngrok to the agent.
${.backend.id}This is the ngrok ID of the backend that serviced this request. This is empty if the endpoint is not handled by an Edge.

Basic Auth Variables

These variables are only populated when using the Basic Auth module.

${.basic_auth.decision}allow if the request successfully authenticated via the Basic Auth module, block otherwise.
${.basic_auth.username}If the request successfully authenticated via the Basic Auth module, this is the username that authenticated.

Circuit Breaker Variables

These variables are only available when using the Circuit Breaker module.

${.circuit_breaker.decision}Whether the HTTP request was sent to the upstream service. allow if the breaker was closed, block if the breaker was open, allow_while_open if the request was allowed while the breaker is open.

Compression Variables

These variables are only populated when using the Compression module.

${.compression.algorithm}The compression algorithm used to encode responses from the endpoint. Either gzip, deflate, or none.
${.compression.bytes_saved}The difference between the size of the raw response and the size of the response as compressed by ngrok.

Connection Variables

${conn.bytes_in}The number of bytes entering the endpoint from the client.
${conn.bytes_out}The number of bytes leaving an endpoint to the client.
${conn.client_ip}Source IP of the connection to the ngrok endpoint.
${conn.end_ts}Timestamp when the connection to ngrok was closed.
${conn.server_ip}The IP that this connection was established on.
${conn.server_port}The port that this connection was established on.
${conn.start_ts}Timestamp when the connection to ngrok was started.

Geo IP Variables

The source of this data is subject to change. It is currently provided by MaxMind GeoIP.

${conn.geo.city}The name of the city, in EN, where the conn.client_ip is likely to originate.
${conn.geo.country}The name of the country, in EN, where the conn.client_ip is likely to originate.
${conn.geo.country_code}The two-letter ISO country code where the conn.client_ip is likely to originate.
${conn.geo.latitude}The approximate latitude where the conn.client_ip is likely to originate.
${conn.geo.longitude}The approximate longitude where the conn.client_ip is likely to originate.
${conn.geo.radius}The radius in kilometers around the latitude and longitude where the conn.client_ip is likely to originate.
${conn.geo.subdivision}The name of the subdivision, in EN, where the conn.client_ip is likely to originate.

HTTP Request and Response Variables

${req.content_length}The content length of the body in bytes. This may not be present if the request does not contain a body or if the client does not specify a content length because they are streaming the body.
${req.content_type}The media type set in the Content-Type header for this request as a string.
${req.content_type.parameters}The parameters set in the Content-Type header as a key value map.
${req.content_type.raw}The Content-Type header for this request as a string.
${req.cookies}The key value map of HTTP cookie objects provided in the request.
${req.headers}The request headers parsed as a map of lower-case names to values.
${req.host}The host header field value for this request.
${req.location}The location header value of the request.
${req.method}The request method.
${req.trailers}The request trailers parsed as a map of lower-case names to values.
${req.url}The normalized full URL for this request.
${req.url.authority}The authority portion of the URL.
${req.url.host}The host for this request.
${req.url.path}The path for this request including the leading forward slash.
${req.url.query}The full query string for this request excluding the leading question mark.
${req.url.query_params}The request query string parsed as a map of names to values.
${req.url.raw_path}The un-normalized path including the leading slash for this request.
${req.url.scheme}The scheme for this request.
${req.url.uri}The URI (path and query) portion of the URL.
${req.url.user}The user:password portion of the URL.
${req.user_agent}The user-agent header value for this request.
${req.version}The HTTP version for this request.
${res.content_length}The length of the content associated with the response.
${res.content_type}The media type set in the Content-Type header for this response as a string.
${res.content_type.parameters}The parameters set in the Content-Type header for this response as a key value map.
${res.content_type.raw}The Content-Type header for this response as a string.
${res.cookies}The key value map of HTTP cookie objects provided in the response.
${res.headers}The response headers parsed as a map of lower-case names to values.
${res.location}The location header value of this response.
${res.status_code}The status code of this response.
${res.trailers}The response trailers parsed as a map of lower-case names to values.

IP Restrictions Variables

These variables are only populated when using the IP Restrictions module.

${.ip_policy.decision}allow if IP Policy module permitted the request to the upstream service, block otherwise.
${.ip_policy.matching_rule}The rule that triggered an IP Policy match on the endpoint.

Mutual TLS

These variables are only populated when using the Mutual TLS module.

${conn.tls.client.extensions}Additional information added to the certificate.
${conn.tls.client.issuer}The issuing authority of the certificate as a string roughly following the RFC 2253 Distinguished Names syntax.
${conn.tls.client.issuer.common_name}Common name of the issuing authority, usually the domain name.
${conn.tls.client.issuer.country}Country name(s) where the issuing authority is located.
${conn.tls.client.issuer.locality}Locality or city of the issuing authority.
${conn.tls.client.issuer.organization}Name(s) of the organization that issued the certificate.
${conn.tls.client.issuer.organizational_unit}Division of the organization responsible for the certificate.
${conn.tls.client.issuer.postal_code}Postal code of the issuing authority.
${conn.tls.client.issuer.province}Province or state of the issuing authority.
${conn.tls.client.issuer.street_address}Street address of the issuing authority.
${conn.tls.client.san}Subject alternative names of the client certificate.
${conn.tls.client.san.dns_names}DNS names in the subject alternative names.
${conn.tls.client.san.email_addresses}Email addresses in the subject alternative names.
${conn.tls.client.san.ip_addresses}IP addresses in the subject alternative names.
${conn.tls.client.san.uris}URIs in the subject alternative names.
${conn.tls.client.serial_number}Unique identifier for the certificate.
${conn.tls.client.signature_algorithm}Algorithm used to sign the certificate.
${conn.tls.client.subject}The entity to whom the certificate is issued as a string roughly following the RFC 2253 Distinguished Names syntax.
${conn.tls.client.subject.common_name}Common name of the subject, usually the domain name.
${conn.tls.client.subject.country}Country name(s) where the subject of the certificate is located.
${conn.tls.client.subject.locality}Locality or city where the subject is located.
${conn.tls.client.subject.organization}Name(s) of the organization to which the subject belongs.
${conn.tls.client.subject.organizational_unit}Division of the organization to which the subject belongs.
${conn.tls.client.subject.postal_code}Postal code where the subject is located.
${conn.tls.client.subject.province}Province or state where the subject is located.
${conn.tls.client.subject.street_address}Street address where the subject is located.
${conn.tls.client.validity.not_after}Expiration date and time when the certificate is no longer valid.
${conn.tls.client.validity.not_before}Start date and time when the certificate becomes valid.

ngrok Variables

${.ngrok.client_ip}This is the original client IP of the request.
${.ngrok.request_id}This is the unique request ID generated by ngrok

OAuth Variables

These variables are only populated when using the OAuth module.

${.oauth.app_client_id}The is the ID of the OAuth2 application used to handle this request.
${.oauth.decision}'allow' if the OAuth module permitted the request to the upstream service, 'block' otherwise.
${.oauth.user.email}This is the email address of the user that was authenticated.
${.oauth.user.id}The authenticated user's ID returned by the OAuth provider.
${.oauth.user.name}The authenticated user's name returned by the OAuth provider.

OpenID Connect Variables

These variables are only populated when using the OpenID Connect module. These variables are identical to the OAuth Variables.

${.oauth.app_client_id}The is the ID of the OAuth application used to handle this request.
${.oauth.decision}allow if the OpenID Connect module permitted the request to the upstream service, block otherwise.
${.oauth.user.email}This is the email address of the user that was authenticated.
${.oauth.user.id}The authenticated user's ID returned by the OpenID Connect provider.
${.oauth.user.name}The authenticated user's name returned by the OpenID Connect provider.

SAML Variables

These variables are only populated when using the SAML module.

${.ngrok.saml.subject}The SAML subject of the the authenticated user.

TLS Termination Variables

These variables are only populated on requests to HTTPS endpoints.

${conn.tls.cipher_suite}The cipher suite selected during the TLS handshake.
${conn.tls.server.extensions}Additional information added to the certificate.
${conn.tls.server.issuer}The issuing authority of the certificate as a string roughly following the RFC 2253 Distinguished Names syntax.
${conn.tls.server.issuer.common_name}Common name of the issuing authority, usually the domain name.
${conn.tls.server.issuer.country}Country name(s) where the issuing authority is located.
${conn.tls.server.issuer.locality}Locality or city of the issuing authority.
${conn.tls.server.issuer.organization}Name(s) of the organization that issued the certificate.
${conn.tls.server.issuer.organizational_unit}Division of the organization responsible for the certificate.
${conn.tls.server.issuer.postal_codePostal code of the issuing authority.
${conn.tls.server.issuer.provinceProvince or state of the issuing authority.
${conn.tls.server.issuer.street_addressStreet address of the issuing authority.
${conn.tls.server.san}Subject alternative names of the ngrok server's leaf TLS certificate.
${conn.tls.server.san.dns_names}DNS names in the subject alternative names of the ngrok server's leaf TLS certificate.
${conn.tls.server.san.email_addresses}Email addresses in the subject alternative names of the ngrok server's leaf TLS certificate.
${conn.tls.server.san.ip_addresses}IP addresses in the subject alternative names of the ngrok server's leaf TLS certificate.
${conn.tls.server.san.uris}URIs in the subject alternative names of the ngrok server's leaf TLS certificate.
${conn.tls.server.serial_number}Unique identifier for the certificate.
${conn.tls.server.signature_algorithm}Algorithm used to sign the certificate.
${conn.tls.server.subject}The entity to whom the certificate is issued as a string roughly following the RFC 2253 Distinguished Names syntax.
${conn.tls.server.subject.common_name}Common name of the subject, usually the domain name.
${conn.tls.server.subject.country}Country name(s) where the subject of the certificate is located.
${conn.tls.server.subject.locality}Locality or city where the subject is located.
${conn.tls.server.subject.organization}Name(s) of the organization to which the subject belongs.
${conn.tls.server.subject.organizational_unit}Division of the organization to which the subject belongs.
${conn.tls.server.subject.postal_code}Postal code where the subject is located.
${conn.tls.server.subject.province}Province or state where the subject is located.
${conn.tls.server.subject.street_address}Street address where the subject is located.
${conn.tls.server.validity.not_after}Expiration date and time when the certificate is no longer valid.
${conn.tls.server.validity.not_before}Start date and time when the certificate becomes valid.
${conn.tls.sni}The hostname included in the ClientHello message via the SNI extension.
${conn.tls.version}The version of the TLS protocol used between the client and the ngrok edge.

Webhook Verification Variables

These variables are only populated when using the Webhook Verification module.

${.webhook_validation.decision}'allow' if the Webhook Verification module permitted the request to the upstream service, 'block' otherwise.

Try it out

First let's create a directory with an example file to serve.

mkdir test-response-headers
cd test-response-headers
echo "response headers test" > t.txt

Next, start ngrok and specify that we want to add a header.

ngrok http file://`pwd` --response-header-add="foo: bar"

In a separate terminal, curl that endpoint.

curl -I https://your-domain.ngrok.app/t.txt

You can see the foo: bar header in the response.

HTTP/2 200
accept-ranges: bytes
content-type: text/plain; charset=utf-8
date: Sat, 29 Jul 2023 14:58:28 GMT
foo: bar
last-modified: Sat, 29 Jul 2023 14:50:23 GMT
ngrok-agent-ips: 1.2.3.4
ngrok-trace-id: 85874fc497b4b0f0d849688dfe4df83c
content-length: 22

Now, let's try removing a header. We'll remove the last-modified header we saw in the previous response. Stop your previous instance of ngrok with Ctrl+C and then restart ngrok with a new command.

ngrok http file://`pwd` --response-header-remove="last-modified"

In a separate terminal, make another request to it.

curl -I https://your-domain.ngrok.app/t.txt

You can see that the last-modified header has been removed from the response.

HTTP/2 200
accept-ranges: bytes
content-type: text/plain; charset=utf-8
date: Sat, 29 Jul 2023 15:01:47 GMT
ngrok-agent-ips: 1.2.3.4
ngrok-trace-id: de01adaa98a96eef167e96485051d786
content-length: 22